Fixed Location & Storage issues

Flutter/Release/MTBBarcodeScanner.xcframework/ios-arm64/MTBBarcodeScanner.framework/Headers/MTBBarcodeScanner-umbrella.h

@@ -0,0 +1,17 @@
+#ifdef __OBJC__
+#import <UIKit/UIKit.h>
+#else
+#ifndef FOUNDATION_EXPORT
+#if defined(__cplusplus)
+#define FOUNDATION_EXPORT extern "C"
+#else
+#define FOUNDATION_EXPORT extern
+#endif
+#endif
+#endif
+
+#import "MTBBarcodeScanner.h"
+
+FOUNDATION_EXPORT double MTBBarcodeScannerVersionNumber;
+FOUNDATION_EXPORT const unsigned char MTBBarcodeScannerVersionString[];
+

Flutter/Release/MTBBarcodeScanner.xcframework/ios-arm64/MTBBarcodeScanner.framework/Headers/MTBBarcodeScanner.h

@@ -0,0 +1,330 @@
+//
+//  MTBBarcodeScanner.h
+//  MTBBarcodeScannerExample
+//
+//  Created by Mike Buss on 2/8/14.
+//
+//
+
+#import <AVFoundation/AVFoundation.h>
+#import <Foundation/Foundation.h>
+#import <UIKit/UIKit.h>
+
+typedef NS_ENUM(NSUInteger, MTBCamera) {
+    MTBCameraBack,
+    MTBCameraFront
+};
+
+/**
+ *  Available torch modes when scanning barcodes.
+ *
+ *  While AVFoundation provides an additional automatic
+ *  mode, it is not supported here because it only works
+ *  with video recordings, not barcode scanning.
+ */
+typedef NS_ENUM(NSUInteger, MTBTorchMode) {
+    MTBTorchModeOff,
+    MTBTorchModeOn,
+};
+
+@interface MTBBarcodeScanner : NSObject
+
+/**
+ *  The currently set camera. See MTBCamera for options.
+ *
+ *  @sa setCamera:error:
+ */
+@property (nonatomic, assign, readonly) MTBCamera camera;
+
+/**
+ *  Control the torch on the device, if present.
+ *
+ *  Attempting to set the torch mode to an unsupported state
+ *  will fail silently, and the value passed into the setter
+ *  will be discarded.
+ *
+ *  @sa setTorchMode:error:
+ */
+@property (nonatomic, assign) MTBTorchMode torchMode;
+
+/**
+ *  Allow the user to tap the previewView to focus a specific area.
+ *  Defaults to YES.
+ */
+@property (nonatomic, assign) BOOL allowTapToFocus;
+
+/**
+ *  If set, only barcodes inside this area will be scanned.
+ *
+ *  Setting this property is only supported while the scanner is active.
+ *  Use the didStartScanningBlock if you want to set it as early as
+ *  possible.
+ */
+@property (nonatomic, assign) CGRect scanRect;
+
+/**
+ *  Layer used to present the camera input. If the previewView
+ *  does not use auto layout, it may be necessary to adjust the layers frame.
+ */
+@property (nonatomic, strong) CALayer *previewLayer;
+
+/*!
+ @property didStartScanningBlock
+ @abstract
+ Optional callback block that's called when the scanner finished initializing.
+ 
+ @discussion
+ Optional callback that will be called when the scanner is initialized and the view
+ is presented on the screen. This is useful for presenting an activity indicator
+ while the scanner is initializing.
+ 
+ The block is always called on the main queue.
+ */
+@property (nonatomic, copy) void (^didStartScanningBlock)(void);
+
+/*!
+ @property didTapToFocusBlock
+ @abstract
+ Block that's called when the user taps the screen to focus the camera. If allowsTapToFocus
+ is set to NO, this will never be called.
+ */
+@property (nonatomic, copy) void (^didTapToFocusBlock)(CGPoint point);
+
+/*!
+ @property resultBlock
+ @abstract
+ Block that's called every time one or more barcodes are recognized.
+ 
+ @discussion
+ The resultBlock is called on the main queue once for every frame that at least one valid barcode is found.
+
+ This block is automatically set when you call startScanningWithResultBlock:
+ */
+@property (nonatomic, copy) void (^resultBlock)(NSArray<AVMetadataMachineReadableCodeObject *> *codes);
+
+/*!
+ @property preferredAutoFocusRangeRestriction
+ @abstract
+ Auto focus range restriction, if supported.
+
+ @discussion
+ Defaults to AVCaptureAutoFocusRangeRestrictionNear. Will be ignored on unsupported devices.
+ */
+@property (nonatomic, assign) AVCaptureAutoFocusRangeRestriction preferredAutoFocusRangeRestriction;
+
+/**
+ *  Initialize a scanner that will feed the camera input
+ *  into the given UIView.
+ *
+ *  @param previewView View that will be overlayed with the live feed from the camera input.
+ *
+ *  @return An instance of MTBBarcodeScanner
+ */
+- (instancetype)initWithPreviewView:(UIView *)previewView;
+
+/**
+ *  Initialize a scanner that will feed the camera input
+ *  into the given UIView. Only codes with a type given in
+ *  the metaDataObjectTypes array will be reported to the result
+ *  block when scanning is started using startScanningWithResultBlock:
+ *
+ *  @see startScanningWithResultBlock:
+ *
+ *  @param metaDataObjectTypes Array of AVMetadataObjectTypes to scan for. Only codes with types given in this array will be reported to the resultBlock.
+ *  @param previewView View that will be overlayed with the live feed from the camera input.
+ *
+ *  @return An instance of MTBBarcodeScanner
+ */
+- (instancetype)initWithMetadataObjectTypes:(NSArray<NSString *> *)metaDataObjectTypes
+                                previewView:(UIView *)previewView;
+
+/**
+ *  Returns whether any camera exists in this device.
+ *  Be aware that this returns NO if camera access is restricted.
+ *
+ *  @return YES if the device has a camera and authorization state is not AVAuthorizationStatusRestricted
+ */
++ (BOOL)cameraIsPresent;
+
+/**
+ *  You can use this flag to check whether flipCamera can potentially
+ *  be successful. You may want to hide your button to flip the camera
+ *  if the device only has one camera.
+ *
+ *  @return YES if a second camera is present and authorization state is not AVAuthorizationStatusRestricted.
+ *  @sa flipCamera
+ */
+- (BOOL)hasOppositeCamera;
+
+/**
+ *  Returns whether scanning is prohibited by the user of the device.
+ *
+ *  @return YES if the user has prohibited access to (or is prohibited from accessing) the camera.
+ */
++ (BOOL)scanningIsProhibited;
+
+/**
+ *  Request permission to access the camera on the device.
+ *
+ *  The success block will return YES if the user granted permission, has granted permission in the past, or if the device is running iOS 7.
+ *  The success block will return NO if the user denied permission, is restricted from the camera, or if there is no camera present.
+ */
++ (void)requestCameraPermissionWithSuccess:(void (^)(BOOL success))successBlock;
+
+/**
+ *  Start scanning for barcodes. The camera input will be added as a sublayer
+ *  to the UIView given for previewView during initialization.
+ *
+ *  This method assumes you have already set the `resultBlock` property directly.
+ *
+ *  This method returns quickly and does not wait for the internal session to
+ *  start. Set the didStartScanningBlock to get a callback when the session
+ *  is ready, i.e., a camera picture is visible.
+ *
+ *  @param error Error supplied if the scanning could not start.
+ *
+ *  @return YES if scanning started successfully, NO if there was an error.
+ */
+- (BOOL)startScanningWithError:(NSError **)error;
+
+/**
+ *  Start scanning for barcodes. The camera input will be added as a sublayer
+ *  to the UIView given for previewView during initialization.
+ *
+ *  This method returns quickly and does not wait for the internal session to
+ *  start. Set the didStartScanningBlock to get a callback when the session
+ *  is ready, i.e., a camera picture is visible.
+ *
+ *  @param resultBlock Callback block for captured codes. If the scanner was instantiated with initWithMetadataObjectTypes:previewView, only codes with a type given in metaDataObjectTypes will be reported.
+ *  @param error Error supplied if the scanning could not start.
+ *
+ *  @return YES if scanning started successfully, NO if there was an error.
+ */
+- (BOOL)startScanningWithResultBlock:(void (^)(NSArray<AVMetadataMachineReadableCodeObject *> *codes))resultBlock error:(NSError **)error;
+
+/**
+ *  Start scanning for barcodes using a specific camera. The camera input will be added as a sublayer
+ *  to the UIView given for previewView during initialization.
+ *
+ *  This method returns quickly and does not wait for the internal session to
+ *  start. Set the didStartScanningBlock to get a callback when the session
+ *  is ready, i.e., a camera picture is visible.
+ *
+ *  @param camera The camera to use when scanning starts.
+ *  @param resultBlock Callback block for captured codes. If the scanner was instantiated with initWithMetadataObjectTypes:previewView, only codes with a type given in metaDataObjectTypes will be reported.
+ *  @param error Error supplied if the scanning could not start.
+ *  
+ *
+ *  @return YES if scanning started successfully, NO if there was an error.
+ */
+- (BOOL)startScanningWithCamera:(MTBCamera)camera resultBlock:(void (^)(NSArray<AVMetadataMachineReadableCodeObject *> *codes))resultBlock error:(NSError **)error;
+
+/**
+ *  Stop scanning for barcodes. The live feed from the camera will be removed as a sublayer from the previewView given during initialization.
+ */
+- (void)stopScanning;
+
+/**
+ *  Whether the scanner is currently scanning for barcodes
+ *
+ *  @return YES if the scanner is currently scanning for barcodes
+ */
+- (BOOL)isScanning;
+
+/**
+ *  If using the front camera, switch to the back, or visa-versa.
+ *  If this method is called when isScanning=NO, it has no effect
+ *
+ *  If the opposite camera is not available, this method will do nothing.
+ *
+ *  @sa hasOppositeCamera
+ */
+- (void)flipCamera;
+
+/**
+ *  Sets the camera and ignores any errors.
+ *
+ *  Deprecated.
+ *
+ *  @sa setCamera:error:
+ */
+- (void)setCamera:(MTBCamera)camera NS_DEPRECATED_IOS(2.0, 2.0, "Use setCamera:error: instead");
+
+/**
+ *  Sets the camera. This operation may fail, e.g., when the device
+ *  does not have the specified camera.
+ *
+ *  @param camera The camera to use, see MTBCamera for options.
+ *  @error Any error that occurred while trying to set the camera.
+ *  @return YES, if the specified camera was set successfully, NO if any error occurred.
+ */
+- (BOOL)setCamera:(MTBCamera)camera error:(NSError **)error;
+
+/**
+ *  If using the front camera, switch to the back, or visa-versa.
+ *
+ *  If this method is called when (isScanning == NO), it will return
+ *  NO and provide an error.
+ *
+ *  If the opposite camera is not available, the error parameter
+ *  will explain the error.
+ *
+ *  @return YES if the camera was flipped, NO if any error occurred.
+ */
+- (BOOL)flipCameraWithError:(NSError **)error;
+
+/**
+ *  Return a BOOL value that specifies whether the current capture device has a torch.
+ *
+ *  @return YES if the the current capture device has a torch.
+ */
+- (BOOL)hasTorch;
+
+/**
+ *  Toggle the torch from on to off, or off to on.
+ *  If the device does not support a torch or the opposite mode, calling
+ *  this method will have no effect.
+ *  To set the torch to on/off directly, set the `torchMode` property, or
+ *  use setTorchMode:error: if you care about errors.
+ */
+- (void)toggleTorch;
+
+/**
+ *  Attempts to set a new torch mode.
+ *
+ *  @return YES, if setting the new mode was successful, and the torchMode
+ *  property reflects the new state. NO if there was an error - use the 
+ *  error parameter to learn about the reason.
+ *
+ *  @sa torchMode
+ */
+- (BOOL)setTorchMode:(MTBTorchMode)torchMode error:(NSError **)error;
+
+/**
+ *  Freeze capture keeping the last frame on previewView.
+ *  If this method is called before startScanning, it has no effect.
+ *
+ *  Returns immediately – actually freezing the capture is
+ *  done asynchronously.
+ */
+- (void)freezeCapture;
+
+/**
+ *  Unfreeze a frozen capture.
+ *
+ *  Returns immediately – actually unfreezing the capture is
+ *  done asynchronously.
+ */
+- (void)unfreezeCapture;
+
+/**
+ *  Captures a still image of the current camera feed
+ */
+- (void)captureStillImage:(void (^)(UIImage *image, NSError *error))captureBlock;
+
+/**
+ *  Determine if currently capturing a still image
+ */
+- (BOOL)isCapturingStillImage;
+
+@end

Flutter/Release/MTBBarcodeScanner.xcframework/ios-arm64/MTBBarcodeScanner.framework/Modules/module.modulemap

@@ -0,0 +1,6 @@
+framework module MTBBarcodeScanner {
+  umbrella header "MTBBarcodeScanner-umbrella.h"
+
+  export *
+  module * { export * }
+}